Aluminum mold interface putty

Product Classification:

Coating putty series

Keyword:

Coating putty series


Product Features

Common Gray RN-JM01H
Plain white RN-JM01B

Product Details


Product
Reynide aluminum mold interface putty is a special putty powder modified with redispersible latex powder and has the functions of interface agent and putty powder in one. It is specially developed for smooth base surfaces such as aluminum mold concrete. Interface putty. ​Product
Characteristic
● High bond strength, firm bond, no peeling.
● Good flexibility, no cracking.
● Provide adhesion to the base surface, and provide a solid base surface for the upper layer of putty or paint.
● Good filling, leveling and workability.
Construction method
● Prepare the base surface to
clean the oil and dust on the surface of the wall. Use Renaide water-based interface agent Chinese painting to fill the loose parts, fill the potholes, remove or polish the raised parts, aluminum film or other smooth base surfaces, and scrape first Putty on the aluminum film interface.
●Material preparation
Prepare water in a bucket according to 35% of the weight of the powder, then add the powder, stir until it becomes a fine paste, let it stand for 5-10 minutes, add a little water and then halve it for aging.
● The construction of materials
is scraped twice, polished layer by layer, and watered for maintenance in the morning and evening at low temperature.
● Proportion and dosage of
water: powder~03:11.2-2kg/m2
Be careful
1. Cement-based putty is a hydraulic material, which must react with water to harden.
2. After stirring, use it up within 1.5 hours, otherwise no more water can be used.
3. The temperature is lower than 5°C, construction is not allowed, and the hot weather will be watered in the morning and evening for maintenance.
4. After construction, before the putty is hardened, avoid rainwater and other open water erosion, especially in summer after high temperature and sun exposure.
Scope of application
It is suitable for priming and leveling the base surface of aluminum formwork concrete, and it can also be used for the general purpose of the bottom layer. It is suitable for construction techniques such as real stone paint, imitation stone colorful paint, and brushed paint.

Product Message

Submit Message
%{tishi_zhanwei}%