News

Industry news

Company news

Prescribe the right medicine to solve the five major problems of putty scraping

Prescribe the right medicine to solve the five major problems of putty scraping

Putty is the same as paint construction, it is easy to cause various surface problems such as cracking, powder falling, air bubbles, etc. due to substandard material quality or improper construction. Everything is forewarned, so let us first understand some common quality problems of putty scraping, and take corresponding measures during construction to prevent these problems from appearing.

07

2022

/

12

Causes and prevention of bad mortar cohesion

Causes and prevention of bad mortar cohesion

The fullness of the mortar in the horizontal mortar joints of masonry is lower than 80%; there are blind joints in the vertical joints, especially in the hollow brick walls, there are often more transparent joints, and the dry wall is built with large shrinkage, and the depth of the shrinkage can even reach 20mm The above affects the fullness of the mortar. Bricks are not watered and wet before masonry, dry bricks are placed on the wall, or the length of plastering is too long, resulting in poor bonding of mortar and bricks.

07

2022

/

12

Putty powder formula, recommended collection

Putty powder formula, recommended collection

Putty powder is a kind of building decoration material, the main components are talcum powder and glue. I just bought a layer of white putty on the surface of the blank room. Usually the whiteness of the putty is above 90° and the fineness is above 330°. Putty is a kind of base material for leveling the wall, which lays a good foundation for future decoration (painting, wallpaper). There are two types of putty for interior walls and exterior walls. Putty for exterior walls must resist wind, sun and sun, so it has high gelatinity, high strength, and a slightly lower environmental index. The comprehensive index of putty in the inner wall is good, and it is hygienic and environmentally friendly. Therefore, the inner wall is not for external use and the outer wall is not for internal use. Putties are usually based on gypsum or cement, so rough surfaces are easier to bond firmly. However, during construction, it is still necessary to brush a layer of interface agent on the base to seal the base and improve the adhesion of the wall, so that the putty can be better bonded to the base.

07

2022

/

12

Putty powder common problems and solutions

Putty powder common problems and solutions

Phenomenon: Bubbles are generated during construction and after a period of time, the surface of the putty is blistered.

07

2022

/

12

How to adjust the putty powder?

How to adjust the putty powder?

How to adjust the putty powder? This is a question that many consumers have paid more attention to recently. Because we all know that the decoration of every household is inseparable from putty powder, so how should we correctly prepare putty powder? In response to the requirements of consumers, the editor of Schneider Ecological Putty will tell you about putty powder today How to adjust and what problems should be paid attention to in the process of deployment, I hope it can help everyone.

07

2022

/

12

Have you encountered the 6 major problems in the construction of putty powder?

Have you encountered the 6 major problems in the construction of putty powder?

he moisture content of the base is too high, and the density is too large or too small. Due to the rich voids and the high moisture content of the putty, it is airtight, and the air is enclosed in the void cavity, which is not easy to eliminate;

07

2022

/

12

< 12 > proceed page

SAF Coolest v1.3 设置面板RGUSS-AIXU-JAASE-ZXV

图片ALT信息： Jiangxi Ruinair New Materials Co., Ltd.
营业执照及SEO链接： Business License

无数据提示

Sorry, the current column has no content !

You can view other columns or return to Home Page

SVG图标库请自行添加图标，用div包起来，并命名使用